This is a digital TDS meter tester used for measuring Total Dissolved Solids present in the water. To measure the purity of water, please use the following instructions. Operating Instructions: Taking TDS Measurements Remove the protective cap. Turn the TDS m on. The on/off switch is located on the panel. Immerse the meter into the water/solution up to the maximum immersion level (2 inch). Lightly stir the m to dislodge any air bubbles. Wait until the display stabilizes. Once the reading stabilizes (approx. 10 Seconds), press the HOLD button to view the reading out of the water. If the m displays a flashing x10 symbol, multiply the reading by 10. After usage, shake off any excess water from your m. Replace the cap. Taking Temperature Measurements: Once the m is on, the temperature function can be used at any time, in or out of liquid. Press the TEMP button. The display will switch to temperature (in Celsius only). To to TDS mode, press the TEMP button. Precautions:The m is not water-tight. Do not dip the m beyond the water level limit. Do not store the m in high temperatures or direct sunlight. Do not attempt to open the housing or tinker with the electronics of the unit.
V**A
Good as per specifications
It works quite well as intended. No calliberation related issues. Helped me in ascertaining the water quality while changing the filter and adjustment of TDS screw.
A**R
Incorrect readings
Reading is incorrect shows 20 points lower than actual
M**A
working
working good... daily use for drinking water
A**R
Anytime check the quality of water. Perfect product @150
Simple.No need to wait for technician.
N**H
Thanks
Good
R**Y
Ok
It is working properly but not going to switch off..
G**D
Not satisfied
Good But they don't given eny InstructionsI'm disappointed
A**R
Good product
Good product
Trustpilot
3 weeks ago
2 weeks ago
