3M Finish Line Knifeless Tape KTS-FL2, Trial Size, Green, 3.5 mm x 10 m

Gets the job done! Nothing wrong with it as long as you use it correctly.

Man this stuff is genius. 10/10

Worked great to add a vinyl wrap accent to the hood of my car. Clean the surface to remove wax and dirt. Clay bar the surface to get it smooth and clean. Lay out your design with 3M knifeless tape. Once satisfied with the tape layout, warm with a heat gun and press it down firmly to make sure it is secure. Wipe the surface with 70% isopropyl alcohol. Next, apply the vinyl wrap. The adhesive is strong and. stays in place even in areas where I lifted the vinyl to remove wrinkles. Pull the string smoothly and keep moving until you get to the end of the tape. Much safer for your fingers and your paint than razor blades. I recommend a small practice piece beforehand with the knifeless tape and vinyl to become familiar with the process.

First time user installing vinyl wrap, cuts very well however it did come unstuck at some locations causing the cut to become slightly malformed. Could be I didn't press hard enough to stick it down although I was sure I did, more likely the glass/metal was too cold, my garage is not heated and outdoor temp was 48F.I would recommend this product to others just press hard to make sure it sticks.

Works awesome .Stong thread for cutting.

I've bought this tape twice now. It works fantastically well. My son uses it on wraps for his vinal car graphics. He is impressed with the ease of use and how well it works. Highly recommend.

The tape does work but needs work to improve quality.Very low adhesion so I had to use heat gun to make it stick.The cut string hard to pull out. You need to cut a slit in center to get the line out.It be much better if cut line was made of metal wire. Cut much sharper.I got it to cut but it left rough edges.This product good for thin material only or it will not work.Overall I got it to cut but I be looking at better brand.

This product always delivers. Rating this because it’s the best. If I could make the perfect product though, I’d make the cutting tape just a tad stickier and easier to remove the sub film without doing 2 swipes!